2. You will find yourself in the Network Connection Wizard. Click Next.
3. In the Network Connection Type Windows, make sure Dial-up to the
Internet is checked, then click Next.
4. In the "Welcome..." window check the last option (I want to set up
my Internet connection manually...), then click Next.
5. Check "I connect through a phone line and a modem"
and click Next.
6. Enter the area code and phone number that you will be dialing in
to, then click the Advanced... button.
7. Click on the Addresses tab, in the DNS server address field, make
sure 'Always us the following:' is checked, then enter
209.55.67.2 as the Primary DNS server. Enter 209.55.67.3
as the Alternate DNS server. Click OK, which takes you
back to the previous window and click Next.
8. Enter your user name and password. Be sure to include a capital P
(as shown above). Click Next.
9. Enter a name for the dial-up connection and click Next.
10. In the Set Up Your Internet Mail Account, check No and click Next.
11. Click Finish. All done!
FlexPop Numbers (National Dial-Up) More numbers are available and can be found on the FlexPop website, www.flexpop.net 1. Click on the 'Locations' option in the top menu. 2. Either click on the map to get an access number, or enter an area code and click 'Search'. 4. Modify your dial-up connection to use the number you just obtained, if you need help doing this, please click here. * You will need to add "@brandx.net" to your user name. So if you normally log in as Puser, you will log in as Puser@brandx.net when using FlexPop numbers. The password remains the same.